Measures to prevent oxidative corrosion of aluminium coil

Release time:

2022-09-16

After the arrival of aluminum rolls, it is suggested to consider the temperature difference, air, and other reasons before making the disposal decision. For example, if the temperature difference between the two places is large, it is recommended to open the package within three days after the arrival of goods. In this way, aluminum coil surface corrosion caused by day and night or air can be avoided.

1. After the arrival of aluminum rolls, it is suggested to consider the temperature difference, air, and other reasons before making the disposal decision. For example, if the temperature difference between the two places is large, it is recommended to open the package within three days after the arrival of goods. In this way, aluminum coil surface corrosion caused by day and night or air can be avoided.

2. Under normal circumstances, after the arrival of unpacking. The processing environment management of aluminum sheet coil, we suggest that the air is more normal, the ventilation is normal, the storage environment is excellent in several environments for storage processing. Remember to avoid storage in humid, etc.

3. After processing aluminum coil in the warehouse, it is suggested to consider choosing to continue to use sealed packaging for storage. Because of the temperature difference in some places and the indoor and outdoor environment and all kinds of irresistible factors. It is still recommended to seal the packaging, conditions can be considered into the appropriate amount of desiccant.

4. For the wooden case packaging or wood packaging used by some export units, our aluminum plate manufacturer suggests that the air environment of wood products must be ventilated from the source. At the same time, at the beginning of the selection of wood materials to control the humidity, moisture, dry conditions and other factors.

5, when using, if it is plate products, pay attention to handling lightly when using to avoid deformation, deterioration and other factors on the surface of aluminum plate. After use, it is better to be able to handle according to the original guarantee. If the condition or other factors around the case, it is best to place ventilation.

6, followed by some simple aluminum plate coil storage routine problems, it is recommended to be placed in the closed workshop, in storage to avoid the top of the workshop seepage, rain leakage and so on. Secondly, in the northern region, we should also consider the oxidation corrosion of aluminum sheet rolls caused by rain erosion.

LATEST NEWS

How do those aluminum sheets bend?

The bending of the aluminum plate, according to the state of the aluminum plate in accordance with the full hard, half hard, soft state to carry out the difference, usually the soft state is the key refers to the aluminum plate O state, the actual effect of the hard bending is basically not very line, in the aluminum plate state in general H18, H19, H38 are all hard, half hard state of the aluminum plate is usually able to fold, H24 is half hard.

2023-05-19

Measures to prevent oxidative corrosion of aluminium coil

2022-09-16

Different forms of aluminium - aluminium rods

Aluminum rod formation is about three steps, batching, melting, casting. According to the production needs, calculate and match different alloy components and various raw materials; Then put the good material into the smelting furnace to melt; Then the refined liquid aluminum is forged into different forms of aluminum rods.

2023-03-24

Why do I need to clean the coil?

Aluminum coil cleaning is to use pressure pump to pressure the cleaning medium, non-contact spray washing or contact brushing on the strip surface, so that the aluminum powder oil on the surface of the material dissolves and falls off into the cleaning medium, and then dry by extrusion roll and high-pressure air purge, and even high temperature air drying, in order to obtain clean and dry aluminum coil.

2022-09-16

Application of aluminum rod

1000 Series: This series is aluminum content. High, because it does not contain other elements, so its production process is relatively simple, the production cost is relatively low, is used to make a variety of hoses, fireworks powder, welding parts, wires, etc.

2023-03-14

What is insulated aluminum coil

1060 aluminum coil is more than 99.60% aluminum content, aluminum content is high. Bright appearance, especially in the current insulation pipeline industry, 1060 is a first choice. The number in the first part is one of "3, 4, 5", which represent the strength levels of the steel bars with yield strengths of 300MPa, 400MPa and 500MPa respectively. The letter in the second part is a description of the type of steel bar. If the letter in this position is empty, it means hot-rolled steel bar, K means waste heat treated steel bar; C means fine-grained steel bar; E means earthquake-resistant steel bar; W means weldable steel bar. The meaning of one or two letters in the third part is the steel factory that produces steel. For example: AY is Anyang Iron and Steel, CG is Chengdu Iron and Steel, T is Tangshan Iron and Steel, X is Xuanhua Iron and Steel, and HG is Handan Iron and Steel. The two digits in the fourth part represent the diameter of the steel bar, 6-50mm.

2023-03-06

Mobile : +86 17762085102
WhatsApp：+86 17762085102
Email : hhx@sdhaihengxin.com
Wechat :+86 17762085102
Add : Gaoxin District, Liaocheng City, Shandong Province

GET A FREE QUOTE