Application of aluminum rod

Release time:

2023-03-14

1000 Series: This series is aluminum content. High, because it does not contain other elements, so its production process is relatively simple, the production cost is relatively low, is used to make a variety of hoses, fireworks powder, welding parts, wires, etc.

Aluminum rods can have different applications depending on the elements they contain:

2000 series: This series of copper content. High hardness. High, belongs to aviation aluminum, not common in the general industry, used for aircraft components, spiral components, rivets, etc.

3000 series: This series of manganese element as the main element, rust prevention function is good, commonly used as downspouts, room partition, baffle, kitchen utensils, food and chemical products composition.

4000 series: This series contains high silicon content, so its wear resistance is better, commonly used for machine parts, forging materials, low melting point, used for welding materials.

5000 series: The main element of this series is magnesium, which is a commonly used aluminum rod material in daily life with high ductility. It is used to make rods, heterosexual materials and wires, etc. It has good corrosion resistance and is used as welding parts of ships, automobiles and aircraft.

6000 series: This series contains magnesium and silicon two elements, is the combination of 4000 series and 5000 series characteristics, so its corrosion resistance, wear resistance is good, used to do car body, TV antenna, machine parts, welding structure extrusion materials.

7000 series: This series mainly contains zinc element, also known as space material, is super duralumin alloy, but basically rely on imports, our technology still needs to be improved.

8000 Series: Most applications are aluminum foil.

According to different needs in life, aluminum rods are made into more targeted materials. It can be seen that aluminum materials are increasingly applied, created and discovered.

LATEST NEWS

How do those aluminum sheets bend?

The bending of the aluminum plate, according to the state of the aluminum plate in accordance with the full hard, half hard, soft state to carry out the difference, usually the soft state is the key refers to the aluminum plate O state, the actual effect of the hard bending is basically not very line, in the aluminum plate state in general H18, H19, H38 are all hard, half hard state of the aluminum plate is usually able to fold, H24 is half hard.

2023-05-19

Measures to prevent oxidative corrosion of aluminium coil

After the arrival of aluminum rolls, it is suggested to consider the temperature difference, air, and other reasons before making the disposal decision. For example, if the temperature difference between the two places is large, it is recommended to open the package within three days after the arrival of goods. In this way, aluminum coil surface corrosion caused by day and night or air can be avoided.

2022-09-16

Different forms of aluminium - aluminium rods

Aluminum rod formation is about three steps, batching, melting, casting. According to the production needs, calculate and match different alloy components and various raw materials; Then put the good material into the smelting furnace to melt; Then the refined liquid aluminum is forged into different forms of aluminum rods.

2023-03-24

Why do I need to clean the coil?

Aluminum coil cleaning is to use pressure pump to pressure the cleaning medium, non-contact spray washing or contact brushing on the strip surface, so that the aluminum powder oil on the surface of the material dissolves and falls off into the cleaning medium, and then dry by extrusion roll and high-pressure air purge, and even high temperature air drying, in order to obtain clean and dry aluminum coil.

2022-09-16

Application of aluminum rod

2023-03-14

What is insulated aluminum coil

1060 aluminum coil is more than 99.60% aluminum content, aluminum content is high. Bright appearance, especially in the current insulation pipeline industry, 1060 is a first choice. The number in the first part is one of "3, 4, 5", which represent the strength levels of the steel bars with yield strengths of 300MPa, 400MPa and 500MPa respectively. The letter in the second part is a description of the type of steel bar. If the letter in this position is empty, it means hot-rolled steel bar, K means waste heat treated steel bar; C means fine-grained steel bar; E means earthquake-resistant steel bar; W means weldable steel bar. The meaning of one or two letters in the third part is the steel factory that produces steel. For example: AY is Anyang Iron and Steel, CG is Chengdu Iron and Steel, T is Tangshan Iron and Steel, X is Xuanhua Iron and Steel, and HG is Handan Iron and Steel. The two digits in the fourth part represent the diameter of the steel bar, 6-50mm.

2023-03-06

Mobile : +86 17762085102
WhatsApp：+86 17762085102
Email : hhx@sdhaihengxin.com
Wechat :+86 17762085102
Add : Gaoxin District, Liaocheng City, Shandong Province

GET A FREE QUOTE